UUKHA Sx80 ILF Limbs NEW 2021
The High Performance Limb
Available now allow 4-5 weeks for delivery
Unsure which limb to buy checkout our buyers guide or contact us to discuss.
The Sx80, with an 80% carbon content, is the next step up from the Sx50, it is a lighter limb which means even more speed and stability through the shot.
The limb is ideal for archers who are looking for great performance at a fair cost.
Ideal for target, barebow and field archers.
Now available in 4 limb lengths Short, Medium, Long and Extra Long so nobody has to compromise on bow length.
Draw weight range in 2lb increments based on a 25" riser from 24lb to 42lb
Three finishes: Standard Matt with Standard Decals, Standard Glossy with Standard Decals and Standard Matt with Minimal Decals.
The new S-Curve profile makes the draw easy, smooth and a joy to shoot.
The S Curve draw combines the best qualities of the curve and x-curve limb to bring you a smooth limb across the whole draw.
The new S-Curve profile
The new S-Curve profile (S for Smoothness, Speed, and Stability) is a new generation of limb profile that combines the best attributes of our previous Curve and Xcurve limbs.
Compared to previous uukha limbs, the beginning of the draw has the same easy feel as the Curve profile, while the end of the draw is as progressively smooth as in the Xcurve profile.
The new design and construction has allowed uukha to be able to improve the stored energy, speed and performance.
A new “S” shaped bottom limb has enabled us to reduce the maximum thickness and mass weight. NOTE: uukha Formula adaptors cannot be used with S-Curve limbs
The redesigned the limb sleeve gives greater protection to the limbs when they are stored separately. The outer fabric is scratch resistant, water repellent and the new thick inner fleece protects the limb itself.
Product excluded from all offers and promotions
What about risers offering a +15% poundage increase when playing with the tiller bolts, such as the Gillo GT?
uukha limbs are designed to provide the best performances in the -5%/+5% range of tiller bolts settings.
With a +15% setting:
You will lose much smoothness.
You will lose in terms of stored energy efficiency: the speed increase brought by the added poundage will be lower than expected.
The stress on the limbs will exceed 10%, corresponding to 5 inches of over-draw, with a risk of early failure and accelerated ageing.
uukha consider such a configuration to be out of normal use conditions, and therefore it is not covered by their guarantee.